Rocket Glide Replacement Parts

RG200 Series Rocket Glide Replacement Parts:

• RP201 – Seal Kit (2-pack) 

• RP202 – Magnets & Spacers (requires training) 

• RP203 – O-Ring  

• RP204 – O-Ring  

• RP205 – Stainless Cap Screw Kit (5-pack) 

Rocket Glide Monthly Maintenance Schedule 

RG100 Carriage: 

• Check Oil Level: Remove the oil fill plug and check the oil level. Fill as needed with 10-weight, non-detergent oil. 
• Inspect External Wiper Seal: Closely inspect the seal for wear or damage, replacing if necessary. 

Cylinder 

• Clean Exterior: Use solvent or brake cleaner and wipe down with a dry cloth. 
• Lubricate the Cylinder: Apply a thin coat of WD-40 or 10-weight oil to the cylinder's surface.
• Inspect for Damage: Check the cylinder for scratches, dents, or rust that could impact its performance. 

Air System 

• Check Air Dryer: Make sure it's functioning properly to avoid damage caused by moisture.
• Inspect Control Systems: Confirm the system is providing proper lubrication (one drop per cycle) to prevent internal wear. 

Quarterly 

• Oil Check for RG100 Carriage: Unbolt door from carriage and cycle door by hand to assure non labored and smooth operation. Remove the oil fill plug, check the oil level, rotate the carriage 180*, drain, rotate back to the original position, reassemble, and fill with 10-weight, non-detergent oil as needed. This will need to be done January, April, July, October. 

• Wiper Seal Inspection: Closely examine the external wiper seal for any signs of wear or damage, replacing if necessary.